Skip to content

Hydraut HSP axial piston pumpsThe highest reliability for the best quality-price ratio

  • Official Hydraut distributor
  • Warranty up to 24 months
  • Sizes HSP10V0-18 … -140 usually in stock
  • Specialised technical support for your project
18–140 cm³/revgeometric displacement, 6 sizes: 18, 28, 45, 71, 100, 140
280 barrated pressure (350 bar peak, 2.5 ms per cycle, 300 h total)
252 l/minmax flow at 1800 rpm (size 140, standard version)
623 Nmmax torque at 280 bar (size 140)
3300 rpmrated speed size 18 at max displacement (3900 max permitted)
7 controlsDR, DRG, DFR/DFR1, HO/HC, ERHZ, DFLR, EQZ

Prefer to talk to a technician? +39 0331 772410 · info@interfluid.net

Hydraut HSP series variable displacement axial piston pump
Hydraut HSP-10VOSwash plate axial piston pump, variable displacement, open circuit, up to 280 bar.
Hydraut HSP axial piston pumps

Price and availability within 24 hours

Tell us the Hydraut HSP code or the code of the pump to replace: a technician will reply within 24 working hours.

Richiedi prezzo e disponibilità

Hydraulics

Applications

  • Hydraulic power units
  • Plastic molding machinery
  • Test benches
  • Oil field equipment
  • Mining machinery
  • Drilling machinery
  • Forestry equipment
  • Construction machinery
Official Hydraut distributor
Official Hydraut distributor
24 months warranty
24 months warranty

Description

The Hydraut HSP axial piston pumps are utilized for actuating services such as hydraulic motors and cylinders across a vast array of applications. They are designed to be modular and highly customizable to optimize hydraulic systems according to specific customer needs.

These pumps operate in an open circuit and encompass all the necessary components to achieve a highly responsive hydraulic system, known for its efficiency and reliability.

The flow delivered by the pump is proportional to the number of revolutions and the angle of inclination of the swashplate, which can be continuously modulated. The maximum and minimum inclination of the swashplate can be mechanically limited using appropriate adjustment screws.

The pumps operate at medium to high working pressures (up to 280 bar continuous and 350 bar peak). Their unique design enables them to withstand axial and radial loads on the shaft, even of considerable magnitude.

Full datasheet on hydraut.com

Hydraut HSP: technical data, codes and quotes on the manufacturer's site

Interfluid is an official Hydraut distributor. The full page for the Hydraut HSP series (technical tables, downloadable catalogues, Rexroth cross-references and quote requests) is published and kept up to date on hydraut.com.

Open the full technical page

Up-to-date data, catalogues and the equivalent code checked by our technical team.

Open on hydraut.com

Already a registered customer? Check stock of the HSP series on Fluid-Hub.net, with an extra 2% discount.

Frequently asked questions

What sizes and controls does the Hydraut HSP series have?

Six sizes from 18 to 140 cm³/rev, open circuit, with 280 bar rated pressure. The available controls are DR, DRG, DFR/DFR1, HO/HC, ERHZ, DFLR (from size 28) and EQZ (sizes 28–100).

What data is needed to request an HSP pump?

Specify the size (18, 28, 45, 71, 100 or 140), the control type, flange, shaft and ports. If you need to replace an existing pump, send the code or nameplate data: our technical office checks the configuration of size, flange, shaft, ports and control before supply.

What is the difference between rated pressure and peak pressure?

The rated pressure is 280 bar. 350 bar is allowed only as a peak: a single period of 2.5 ms and 300 total hours of operation at this pressure.

Can I connect several HSP pumps in a single unit?

Yes, with the through-drive you can build multiple pumps with independent circuits, without a splitter. Two pumps of the same size are allowed in tandem, with maximum dynamic acceleration of 10 g without an additional bracket.

How long does it take to receive price and availability?

A technician replies within 24 working hours.

Can't find the code you need?Send us the code of the Hydraut HSP pump or of the pump to replace, or the displacement, pressure and control data: we will tell you the correct code and its availability.

Request price and availability

Characteristics

  • Sizes from 18 cc to 140 cc
  • Open circuit
  • Nominal pressure 280 bar
  • Peak pressure 350 bar
  • Suction and discharge ports: rear or lateral
  • Provision for coupling with other pumps
  • Torque limiter (constant power)
  • Mounting flanges according to ISO and SAE standards

Advantages

  • Low noise
  • High reliability
  • Wide selection of flow and pressure control compensators
  • Excellent quality-price ratio

Alternative to:

  • Rexroth A10V(S)O series including spare parts
  • Duplomatic VPPM series
  • Casappa LVP series
  • Eaton Vicker PVM, PVQ, PVH series

Technical data by size

The HSP-10VO series is a swash plate axial piston pump, variable displacement, for open circuits. The 6 sizes share the 280 bar rated pressure and the range of compensators; displacement, flow, torque and dimensions change. Theoretical values, without efficiencies and tolerances, for mineral oil at 1 bar absolute at the inlet.

SizeDisplacement (cm³/rev)Rated rpm (max permitted)Flow at rated n (l/min)Max torque at 280 bar (Nm)Max power at rated n (kW)Weight without through-drive (kg)
18183300 (3900)59802812
28283000 (3600)841253915
45452600 (3100)1172005521
71712200 (2600)1563167333
1001002000 (2400)2004459345
1401401800 (2100)25262311860
SizeMax radial shaft load (N)Max axial load (N)Max input torque, S shaft (Nm)Max through-drive torque, S shaft (Nm)Fill capacity (L)
183507001241080.4
28120010001981600.7
45150015003193191.0
71190024006264921.6
1002300400011047782.2
14028004800162012663.0

Values from the Hydraut HSP catalogue version 31, tables pp. 6-7: rated speed at maximum displacement. The high-speed version (optional for sizes 45, 71, 100, 140) has rated speeds of 3000, 2550, 2300, 2050 rpm (max 3300, 2800, 2500, 2200) and flows of 135, 178, 230, 287 l/min. Minimum pressure on the high-pressure side 10 bar; inlet from 0.8 to 10 bar absolute; max case pressure 2 bar absolute. Optimum viscosity 16–36 mm²/s, fluid temperature from −40 to +115 °C; minimum cleanliness ISO 4406 20/18/15.

Compensators and controls

  • DR: pressure control; DRG: pressure control with remote command
  • DFR / DFR1: hydraulic pressure and flow (X–T open or closed)
  • HO / HC: pressure with electric on-off command, normally open or closed (12 or 24 VDC, 110 or 230 VAC coils)
  • ERHZ: proportional pressure control (electronic driver not included)
  • DFLR: pressure, flow and constant power (sizes 28–140; power set at the factory)
  • EQZ: proportional flow control (sizes 28–100, 140 on request; driver not included)

Options and accessories

  • Right (R) or left (L) rotation, seen from the shaft side
  • NBR (P, standard) or FKM-Viton (V) seals
  • ANSI B92.1a splined shafts (S, R, U), cylindrical with DIN 6885 key (P) or SAE (K)
  • ISO 3019-2 metric flanges (2 or 4 holes) and ISO 3019-1 SAE (2 or 4 holes)
  • SAE flanged ports on opposite sides, with metric or UNC thread
  • Through-drive for multiple and tandem pumps of the same size (ISO 3019-1 and ISO 3019-2 flanges)
  • Optional high-speed version for sizes 45, 71, 100, 140

Are you interested in this product?

Subscribe to Fluid-Hub.net, the digital portal for our products.

Purchase directly online and get an extra 2% discount and many other benefits.

Choose the Hydraut piston pump you need and go directly to Fluid-Hub.net

SeriesAverage stockDiscover online availability
From HSP10V0-18 to HSP10V0-140✅ Usually availablefluid-hub.net_logo_colori

Download

Why Your Fluid Mate?

Automated warehouse

Automated warehouse

To monitor the order flow with precision, accuracy and speed

Wide range of products

Wide range of products

We offer you more alternatives to quickly meet your request

Specialized technical support

Specialized technical support

We study the comparisons with other brands and provide support for your project

Testing and calibration

Testing and calibration

With our test bench, we guarantee you quality and products calibrated according to your needs

E-commerce

E-commerce

You can check real-time stock availability and make purchases independently on Fluid-Hub.net

Are you interested in this product?

Fill out the form and request a quote